Double Speed 406mm Power Tool Jig Saw Electric Saw

Double speed 406mm POWER TOOL JIG SAW ELECTRIC SAW

This machine is used for the die making for Diecutting machine ,now three type ,A B and C type .

 A is the ordinary type ,finishing the function of clearance saw powder by blow and chucking saw blade by pedal.

 B is improve type, covering the function of clearance saw powder by absorb dust, the worktable is clear and sanitation.

C is advanced type, covering the function of clearance saw powder by absorb dust and automatic chucking saw blade which ensure the accuracy and speed of saw process.
Product detail




Specifications

Features of jig saw parts:

1. Soft-grip handle for comfortable extended use
2. Lock-on switch for continuous  use with variable speed dial
3. Base plate tilts to 45°in both directions

4. An ergonomically designed and versatile jigsaw - perfect for DIY and hobby work

5. Suitable for materials including wood, glass, plastic, plywood and particle board

6. Powerful 570W motor allows you to create straight, curved, and circular cuts

Operations

ON/OFF SWITCH

Depress the ON/FF Trigger (1) to operate the jig saw parts.

SWITCH LOCK-ON BUTTDN

Depress the ONIOFF Trigger to power on the saw then press the Lock-On Button(2). This will now lock the Jigsaw onto continuous use.

To switch the saw off, depress and release the ON/OFF Trigger.

VARIABLE SPEED CONTROL

Adjust the Variable Speed Control to increase or decrease the speed according to the material thickness and Blade specification to be used.

NOTE

The required stroke speed depends on the type of material and working conditions. This should be fast enough to make reasonable progress while slow enough to keep a Clean tut and avoid placing too much strain on the tool. Generally, Finer Blades use a higher speed whore as coarser Blades use a slower speed.

ANGLE ADJUSTMENT

To adjust the angle of inclination, loosen the 2 Hex Bolts (C) on the base of Jigsaw.

Move the base plate forwards or backwards until the vertical slots align with the two Hex Bolts(C). You can then rotate the base plate to the required angle.

The angle of inclination numbers are stamped onto the curved bracket on top of the Base Plate to help you to set the correct angle.

Check the Roller Support(B) before tightening.

Firmly tighten the Hex Bolts when finished.

Factory picture